Home » Products » Pneumatic Grippers » AGP-187 Double-Guided Wedge Parallel Gripper

AGP-187 Double-Guided Wedge Parallel Gripper

Features & Benefits

Jaws machined from S7 tool steel to prevent jaw breakage.
Ultra high gripping force to weight ratio.
Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
Piston seals are quad ring type for long service life.
Additional side mounting holes and side air ports for optional mounting and porting.
Proximity switches are available to monitor open and closed position of the jaws.
Series AGP-187 is fully field repairable for cost savings and minimum down time.

Measurement Type

Sensor Options

Sensor Type

Sensor Connector

Clear

Design: Parallel, Double Acting, Synchronized Jaws

Stroke: 0.187 ±.005 in [4.75mm]
Gripping Force @ 80 PSI [5.5 bar]:
Closing: 15 lbs [66 N]
Opening: 16 lbs [71 N]

Time:
Close: 0.15 sec [0.15 sec]
Open: 0.15 sec [0.15 sec]

Pressure Range:
20-120 PSI [1.3-8 bar]

Temperature Range:
-20°-180°F [-28°-80°C]

Side Play:
± 0.001 [0.03 mm]

Repeatability from center:
± .002 [0.06 mm]

Loading Capacity: Static – Dynamic

Max Tensile T
50 lbs 7 lbs
[222 N] [31 N]

Max Compressive C
75 lbs 12 lbs
[333 N] [53 N]

Max Moment Mx
30 in/lb 5 in/lb
[3.4 Nm] [0.6 Nm]

Max Moment My
30 in/lb 5 in/lb
[3.4 Nm] [0.6 Nm]

Max Moment Mz
30 in/lb 5 in/lb
[3.4 Nm] [0.6 Nm]

Material: High Strength, Hard Coated aluminum bronze alloys, Steel

Weight: 3 oz. [85 g]

Piston Diameter: 0.75 in [19 mm]