Home » Products » Pneumatic Grippers » AGP-250 Double-Guided Wedge Parallel Gripper

AGP-250 Double-Guided Wedge Parallel Gripper

Features & Benefits

Ultra high gripping force to weight ratio.
True parallel jaw motion for easy tooling.
Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
Piston seals are quad-ring type for long service life.
Additional side mounting holes and side air ports for optional mounting and porting.
Proximity switches are available to monitor open and closed position of the jaws.
Series AGP-250 is fully field repairable for cost savings and minimum down time.

Measurement Type

Sensor Options

Sensor Type

Sensor Connector

Clear

Design: Parallel, Double Acting, Synchronized Jaws

Stroke: 0.25 in [6.3 mm]

Gripping Force @ 80 PSI [5.5 bar]:
Closing: 20 lbs [89 N]
Opening: 22 lbs [97 N]

Time:
Close: 0.2 sec [0.2 sec]
Open: 0.2 sec [0.2 sec]

Pressure Range:
30-120 PSI [2-8 bar]

Temperature Range:
-20°-180°F [-28°-80°C]

Side Play:
± 0.001 [0.03 mm]

Repeatability from center:
± .002 [0.06 mm]

Loading Capacity: Static – Dynamic

Max Tensile T
100 lbs 15 lbs
[444 N] [66.7 N]

Max Compressive C
150 lbs 25 lbs
[667 N] [111 N]

Max Moment Mx
90 in/lb 15 in/lb
[10 Nm] [1.7 Nm]

Max Moment My
90 in/lb 15 in/lb
[10 Nm] [1.7 Nm]

Max Moment Mz
90 in/lb 15 in/lb
[10 Nm] [1.7 Nm]

Material: High Strength, Hard Coated aluminum bronze alloys, Steel

Weight: 4 oz. [113 g]

Piston Diameter: 1.00 in [25.4 mm]