![AGW-625-2](https://www.agi-automation.com/wp-content/uploads/2015/01/AGW-625-2.jpg)
AGW-625-2 Wide Body, Synchronous / Non-Synchronous Series Parallel Gripper
Features & Benefits
- Ultra high gripping force to weight ratio due to four opposing independent pistons that direct power to the jaws.
- True parallel jaw motion for easy tooling.
- Units are permanently lubricated for non-lube air operation, allowing for compliance with OSHA regulations.
- Piston seals are quad ring type for long service life.
- Large jaw support shafts are guided through the full width of the main body.
- Proximity switches are available to monitor open and closed position of the jaws.
- The AGW Series is fully field repairable for cost savings and minimum down time.
- Non-synchronous versions allow the grippers jaws to comply to the parts centerline versus the grippers centerline.
PRODUCT SPECIFICATIONS
Design: Parallel, Double Acting, Synchronized Jaws
Stroke: 2 in [50.8 mm]
Gripping Force @ 80 PSI Per Jaw [5.5 BAR]
Closing: 130 lbs [578 N]
Opening: 132 lbs [587 N]
Time:
Close: 0.3 sec [0.3 sec]
Open: 0.3 sec [0.3 sec]
Pressure Range:
Low/High 20-120 PSI [1.7-8 BAR]
Temperature Range:
Low/High -20°/180°F [-28°/80°C]
Side Play:
± 0.001 [.03 mm]
Repeatability from Center:
± 0.002 [.06 mm]
Loading Capacity: Static – Dynamic
Max Tensile T
1300 lbs 150 lbs
[5700 N] [667 N]
Max Compressive C
1300 lbs 150 lbs
[5700 N] [667 N]
Max Moment Mx
1100 in/lb 120 in/lb
[124 Nm] [13.5 Nm]
Max Moment My
1500 in/lb 130 in/lb
[170 Nm] [14.7Nm]
Max Moment Mz
1100 in/lb 120 in/lb
[124 Nm] [13.5 Nm]
Material: High Strength,Hard Coated aluminum bronze alloys, Steel
Weight: 6.3 lbs [2.9 kg]
Piston Diameter: 1.625 in [41.3 mm]