AGT-5 Powered Slide Linear Thruster

Features & Benefits

Compact lightweight unit with replacable air cylinder.
Floating piston rod coupling eliminates cylinder binding..
Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
Optional stroke adjustment for precise, repetitive operation.
Aluminum body and end blocks contain tapped holes and dowel pin holes for precision mounting or fixturing.
Standard end plate to stop shaft vibrations.
Proximity switches are available to monitor end of stroke position of the body.
Optional shock absorbers can be ordered for smooth operation.
Series AGT-5 is fully field repairable for cost savings and minimum down time. Repair kits are available for repairs or maintenance.

Stroke Range (in)

Measurement Type

Sensor Options

Sensor Type

Sensor Connector

Clear

SKU: AGT-5 Categories: Linear Actuators, Thruster Linear Actuator

Design: Replaceable air cylinder, linear bearings on
steel hardened shafts

Stroke:
12 in max. (1″ increments) [304.8 mm] [25.4 mm]

Thrust Force @ 80 PSI [5.5 BAR]
140 lbs (multiply force factor by input pressure in PSI)

Extended: 1.76 lbs [8 N]

Retract: 1.61 lbs [7 N]

Recommended Speed:
1-40 in/sec [XX-XX m/sec]

Pressure Range:
Low/High 20-120 PSI [1.4-8 BAR]

Temperature Range:
Low/High -20°/150°F [-28°/80°C]

Side Play: ± 0.001 [.03 mm]

Deflection: See Chart

Maximum Payload: 40 lbs [18.2 kg]

Material: High Strength, Aluminum Alloys, Steel Components

Weight:
7.0 lbs + 6.7 oz/in [3.2 kg + 5.2 g/mm]

Shaft Diameter: 3/4 in [19 mm]

Piston Diameter: 1 1/2 in [38 mm]