Home » Products » Pneumatic Grippers » 2-Jaw Parallel Pneumatic Grippers » AGP-83 Three Jaw Parallel Gripper T-Slot Bearing Series
AGP-83

AGP-83 Three Jaw Parallel Gripper T-Slot Bearing Series

Features & Benefits

  • Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
  • High gripping force to weight ratio
  • Compact design with long stroke
  • True parallel jaw motion for easy tooling
  • Units are permanently lubricated for non-lube air operation, this allowing for compliance with OSHA regulations..
  • Pistons seals are quad ring type for long service life.
  • Hall effect sensors are available to monitor open and closed position of the jaws.
  • AGP is fully field repairable for cost savings and minimum down time
    Multiple mounting surfaces on jaw for easy tooling.
  • Optional stripper plate ensures part preload in location upon release.

Request a Quote
DOWNLOAD PRODUCT PDF
DOWNLOAD CAD FILE

PRODUCT SPECIFICATIONS

Design: Parallel, Double Acting, Synchronized Jaws

Stroke: .88 in [22.3 mm]

Gripping Force @ 80 PSI [5.5 BAR]
Closing: 280 lbs [1245 N]
Opening: 285 lbs [1267 N]

Time:
Close: 0.22 sec [0.22 sec]
Open: 0.22 sec [0.22 sec]

Pressure Range:
Low/High 30-120 PSI [2-8 BAR]

Temperature Range:
Low/High -20°/180°F [-28°/80°C]

Side Play:
± 0.001 [.03 mm]

Repeatability from Center:
± 0.002 [.06 mm]

Loading Capacity: Static – Dynamic

Max Tensile T
2100 lbs 760 lbs
[9300 N] [3380 N]

Max Compressive C
2100 lbs 760 lbs
[9300 N] [3380 N]

Max Moment Mx
2100 in/lb 760 in/lb
[237 Nm] [85.8 Nm]

Max Moment My
2100 in/lb 760 in/lb
[237 Nm] [85.8 Nm]

Max Moment Mz
1600 in/lb 550 in/lb
[180 Nm] [62.1 Nm]

Material: High Strength,Hard Coated aluminum bronze alloys, Steel

Weight: 6.0 lbs [2.7 kg]

Piston Diameter: 3.5 in [89 mm]

3-D Interactive Preview