Home » Products » Pneumatic Grippers » 2-Jaw Angular Pneumatic Gripper » AGA-50 Double-Guided Low Profile Angular Gripper

AGA-50 Double-Guided Low Profile Angular Gripper

Features & Benefits

Grippers provide up to 180 degrees of angular jaw travel allowing the grippers to completely retract from the work area eliminating another required axis of travel.
High gripping force to weight ratio.
Compact design with large stroke..
Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
Piston seals are quad-ring type for long service life.
The gripper body has two mounting surfaces with dowl pin holes to provide accurate mounting in a variety of positions.
Proximity switches are available to monitor open and closed position of the jaws.
Series AGA-50 is fully field repairable for cost savings and minimum down time.

Size

Measurement Type

Sensor Options

Sensor Type

Sensor Connector

Clear

Design: Angular

Stroke: 0-180° adj

Gripping Force @ 80 PSI [5.5 BAR]
Closing: 720 lbs [3200 N]
Opening: 685 lbs [3050 N]

Time:
Close: 0.2 sec [0.2 sec]
Open: 0.2 sec [0.2 sec]

Pressure Range:
Low/High 10-120 PSI [.7-8 BAR]

Temperature Range:
Low/High -20°/180°F [-28°/80°C]

Side Play:
± 0.001 [.03 mm]

Repeatability from Center:
± 0.002 [.06 mm]

Loading Capacity: Static – Dynamic

Max Tensile T
1200 lbs 400 lbs
[5330 N] [1780 N]

Max Compressive C
1200 lbs 400 lbs
[5330 N] [1780 N]

Max Moment Mx
930 in/lb 310 in/lb
[105 Nm] [35 Nm]

Max Moment My
880 in/lb 276 in/lb
[20.3 Nm] [31.2 Nm]

Max Moment Mz
880 in/lb 276 in/lb
[99.5 Nm] [31.2 Nm]

Material: High Strength,Hard Coated aluminum
bronze alloys, Steel

Weight: 5.5 lbs [2.3 kg]

Piston Diameter: 2.25 in [57.2 mm]