Home » Products » Pneumatic Grippers » AGLP-16-1000 T-Slot Bearing Series Parallel Gripper

AGLP-16-1000 T-Slot Bearing Series Parallel Gripper

Features & Benefits

Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
Rugged rack and pinion synchronizing.
High gripping force to weight ratio.
Compact Design with long stroke.
True parallel jaw motion for easy tooling.
Units are permanently lubricated for non-lube air operation, this allowing for compliance with OSHA regulations.
Piston seals are quad ring type for long service life.
Hall effect sensors are available to monitor open and closed positions of the jaws.
AGLP is fully field repairable for cost savings and minimum down time.
Gripper can be ordered with 3 different stroke on the same size body.

Stroke Options

Sensor Options

Sensor Type

Sensor Connector

Clear

Design: Parallel, Double Acting, Synchronized Jaws

Stroke: 1.00 in [25.4 mm]

Gripping Force @ 80 PSI [5.5 BAR]
Closing: 120 lbs [533 N]
Opening: 120 lbs [533 N]

Time:
Close: 0.25 sec [0.2 sec]
Open: 0.25 sec [0.2 sec]

Pressure Range:
Low/High 10-120 PSI [.7-7 BAR]

Temperature Range:
Low/High -20°/180°F [-28°/80°C]

Side Play: ± 0.001 [.03 mm]

Loading Capacity: Static – Dynamic

Max Tensile T
310lbs 103 lbs
[1000 N] [333 N]

Max Compressive C
310 lbs 103 lbs
[1000 N] [333 N]

Max Moment Mx
785 in/lb 262 in/lb
[88.7 Nm] [29.6 Nm]

Max Moment My
940 in/lb 313 in/lb
[106.2 Nm] [35.3 Nm]

Max Moment Mz
785 in/lb 262 in/lb
[88.7 Nm] [29.6 Nm]

Material: High Strength,Hard Coated aluminum bronze alloys, Steel

Weight: 8 lb [3.62 kg]

Piston Diameter: 2.00 in [50.8 mm]