Home » Products » Pneumatic Grippers » 2-Jaw Parallel Pneumatic Grippers » AGP-23 T-Slot Bearing Three Jaw Parallel Gripper

AGP-23 T-Slot Bearing Three Jaw Parallel Gripper

Features & Benefits

Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
High gripping force to weight ratio.
True Parallel jaw motion for easy tooling.
Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
Piston seals are quad-ring type for long service life.
Hall effect sensors are available to monitor open and closed position of the jaws.
AGP is fully field repairable for cost savings and minimum down time.
Optional Stripper plate ensures part preload in location upon release.

Size

Measurement Type

Sensor Options

Sensor Type

Sensor Connector

Optional Port

Clear

Design: Parallel, Double Acting, Synchronized Jaws

Stroke: .30 in [7.6mm]

Gripping Force @ 80 PSI [5.5 BAR]
Closing: 29 lbs [129 N]
Opening: 26 lbs [115 N]

Time:
Close: 0.22 sec [0.22 sec]
Open: 0.22 sec [0.22 sec]

Pressure Range:
Low/High 30-120 PSI [2-8 BAR]

Temperature Range:
Low/High -20°/180°F [-28°/80°C]

Side Play:
± 0.001 [.03 mm]

Repeatability from Center:
± 0.002 [.06 mm]

Loading Capacity: Static – Dynamic

Max Tensile T
300 lbs 100 lbs
[1300 N] [444 N]

Max Compressive C
300 lbs 100 lbs
[1300 N] [444 N]

Max Moment Mx
250 in/lb 75 in/lb
[2.8 Nm] [8.5 Nm]

Max Moment My
250 in/lb 75 in/lb
[2.8 Nm] [8.5 Nm]

Max Moment Mz
150 in/lb 75 in/lb
[17 Nm] [8.5 Nm]

Material: High Strength,Hard Coated aluminum bronze alloys, Steel

Weight: 9 oz [255 g]

Piston Diameter: 1.25 in [32 mm]