Home » Products » Pneumatic Grippers » 2-Jaw Parallel Pneumatic Grippers » AGP-63 T-Slot Bearing Three Jaw Parallel Gripper

AGP-63 T-Slot Bearing Three Jaw Parallel Gripper

Features & Benefits

Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
High gripping force to weight ratio.
Compact design with long stroke.
True Parallel jaw motion for easy tooling.
Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
Piston seals are quad-ring type for long service life.
Hall effect sensors are available to monitor open and closed position of the jaws.
AGP is fully field repairable for cost savings and minimum down time.
Multiple mounting surfaces on jaw for easy tooling.
Optional Stripper plate ensures part preload in location upon release.

Size

Measurement Type

Sensor Options

Sensor Connector

Clear

Design: Parallel, Double Acting, Synchronized Jaws

Stroke: .62 in [15.7 mm]

Gripping Force @ 80 PSI [5.5 BAR]
Closing: 200 lbs [889 N]
Opening: 194 lbs [862 N]

Time:
Close: 0.22 sec [0.22 sec]
Open: 0.22 sec [0.22 sec]

Pressure Range:
Low/High 30-120 PSI [2-8 BAR]

Temperature Range:
Low/High -20°/180°F [-28°/80°C]

Side Play:
± 0.001 [.03 mm]
Repeatability from Center:
± 0.002 [.06 mm]

Loading Capacity: Static – Dynamic

Max Tensile T
1250 lbs 400 lbs
[5560 N] [1780 N]

Max Compressive C
1250 lbs 400 lbs
[5560 N] [1780 N]

Max Moment Mx
1000 in/lb 400 in/lb
[112 Nm] [45 Nm]

Max Moment My
1000 in/lb 400 in/lb
[112 Nm] [45 Nm]

Max Moment Mz
1000 in/lb 300 in/lb
[112 Nm] [33.9 Nm]

Material: High Strength,Hard Coated aluminum bronze alloys, Steel

Weight: 2.3 lbs [1 kg]

Piston Diameter: 2.75 in [69.8 mm]